ESTIC CORPORATION
With its NUTRUNNER system, ESTIC CORPORATION leads the industries in the field of design, production and maintenance of energy-saving auto-assembly machines.
HANDHELD NUTRUNNER
Cables & Accessories
Cables
| Model | Total Length (m) |
|---|---|
| EH2-CVS05-SS | 5 |
| EH2-CVS10-SS | 10 |
| EH2-CVS15-SS | 15 |
| EH2-CVS20-SS * | 20 |
| EH2-CVS25-SS * | 25 |
| EH2-CVS30-SS * | 30 |
| EH2-CVC03-SS | 1.5m(Full extended : 3m), Curl Cable |
* Made to order
Cable Adapter
| Model | Product Name | Remarks |
|---|---|---|
| EH2-CVAD-L | L type Cable Adapter | 90 degree Bent Type |
| EH2-CVAD-U | U type Cable Adapter | 180 degree Bent Type |
| EH2-CVAD-P | Cable Relay Adapter | For Relaying Cable |
Tool Accessories
| Model | Product Name | Remarks |
|---|---|---|
| EH2-SB01 | Hanging fixture | For Straight and Angle tools (100 W type) : Horizontal |
| ENRH-SB02 | Hanging fixture | For Straight and Angle tools (200 W type) : Horizontal |
| EH2-SH01 | Hanging fixture | For Straight and Angle tools （50/100/200W type） : Vertical |
| EH2-PH01 | Hanging fixture | For Pistol tools （50/100W type） : Horizontal/Upside down |
| EH2-PH02 | Hanging fixture | For Pistol tools (50/100 type) : Horizontal , For straight tools (50W type ) : Horizontal |
| EH2-PH03 | Hanging fixture | For Pistol tools (50/100 type) : Vertical |
| Model | Product Name | Remarks |
|---|---|---|
| ENRH-RP20S | Reaction plate | For 16/20 N·m Straight and Pistol tools (single) |
| ENRH-RP20W | Reaction plate | For 16/20 N·m Straight and Pistol tools |
| ENRH-RP35W | Reaction plate | For 35 N·m Straight tool |
| ENRH-RP90W | Reaction plate | For 55/85/120 N·m Straight tools |
| ENRH-LNM30 | Reaction locking nut | For 16/20 N·m Straight and Pistol tools |
| Model | Product Name | Remarks |
|---|---|---|
| ENRH-SH01 | Support handle | |
| ENRH-SH02 | Switch handle | With direction selector switch |
| EH2-LS01 | Short switching lever | For Straight and Angle tools (100/200/300W type) |
| EH2-LS02 | Long switching lever | For Straight and Angle tools (100/200W type) |
| Models | Product Name | Remarks |
|---|---|---|
| EH2-PP01 | Protection cover | For 50 N·m Pistol tools |
| EH2-PP02 | Protection cover | For 16/20 N·m Pistol tools |
| EH2-PP03 | Protection cover | For 5/10 N·m Pistol tools |
| * Made to order | Protection cover | For 20 N·m Angle tools |
| * Made to order | Protection cover | 30/50 N·m Angle tools |
| * Made to order | Protection cover | 80 N·m Angle tools |
| * Made to order | Protection cover | 120 N·m Angle tools |
| * Made to order | Protection cover | 180 N·m Angle tools |
Controller Accessories
| Models | Product Name | Remarks |
|---|---|---|
| EH2-FCN18-PI | Connectors | For PIO (IN) connection |
| EH2-FCN19-PO | Connectors | For PIO (OUT) connection |
| EH2-FCN13-RL | Connectors | For relay/exit-in connection |
| EH2-FCN4-RM | Connectors | For the remote I/O connection |
| EH2-FCN5-DC | Connectors | For DC OUT connection |
| Models | Product Name | Remarks |
|---|---|---|
| EH2-CVNK-005 | NET cable | For the multi spindle / TCU connection : 0.5m |
| EH2-CVNK-010 | NET cable | For the multi spindle / TCU connection : 1m |
| EH2-CVNK-030 | NET cable | For the multi spindle / TCU connection : 3m |
| EH2-CNST | Terminator |
| Models | Product Name | Remarks |
|---|---|---|
| EH2-CF01 | Controller base | For vertically setting the controller |
Tracer Arm (Assisting arm with position detecting function)
・The “Tracer arm” is an assistance arm that does away with the burden on the operator due to the reaction
force caused at the time of fastening or the weight of the tool and has the function of detecting the current
position of the tool. It is an application for the Handy 2000.
・This product eliminates errors due to human factors caused in processes where fastening sequences and
fastening positions were specified based on operating instruction, improves the operating efficiency and provides
high-dimensional traceability by associating the fastening torque with the fastening position (coordinate).
・This product provide cirtain quolity control in production process which required double fastening prevention,
regurated fastening procedure, auto-channel change for diiferent torque position.
・System configuration is only the arm unit and the control unit (TCU). Therefore, control unit such as PLC is
not required.
Wiring with Hand2000 controller is not complicated, just Plug-in Net cable.
| Applied Torque | 1 ～ 55 N・m |
|---|---|
| Arm Length (Standard) | 500 mm × 500 mm |
| Weight of arm main body | 5.5 kg |
| Number of registrable work pieces | 99 types |
| Number of registrable position (per type) | 63 positions |
| Repetitive position detection accuracy | ±1 mm |
| Recommended work space (W×D×L） | 1000 mm × 700 mm × 330 mm |
