Products

HANDHELD NUTRUNNER

System Configuration

Variety of functions is integrated into the system
■ Simplified PLC Functions
A simplified sequence control function with AND, OR, and timer control is equipped.
Logic programs can be set to select the ON lamps or set off a buzzer for a certain length of time depending on the fastening result of OK or NG.
■ Free Allocation Function
The fastening result data stored in the controller and outputted on the external unit after every fastening can be user selected.
The function to select only necessary items can make the data size smaller.
The control signals for the system control connectors (PIO), remote I/O, relay output, and no voltage contact input can also be user allocated.
■ Multi-spindle Function
A maximum of 10 spindles can be operated for synchronous fastening without the help of external controls.
The synchronous fastening allows for shorter operating time.
■ Compatible with bar code readers
A bar code reader can be connected directly with the controller.
The read data can be reflected in the fastening result.
The fastening channel and job can be changed based on the read data when the identifier function is in use.
System Configuration
Enlarge the image
Multi-spindle Connection

Channels can be automatically selected by the vehicle identification number.
The fastening condition is set on the master controller and sent to the local controllers via NET cables for each fastening.

Expanding Network Connection

The fastening results for up to 50 units (Variable depending on the network structure). This wire saving connection can be used for the channel setting and interlocking from the outside with the use of Fieldbus.

Network Connection
Enlarge the image
Configuration resulting in effective cost reduction

Peripheral units required in the past are not necessary.
Low cost and space saving system can be configured.

Tool and Controller Combinations
Tool Type Models Specifications Controller Unit Motor Power (W)
Straight EH2-R0005-SL Lever start EH2-HT30-10*** 50
EH2-R0005-SP Push-to-start EH2-HT30-10*** 50
EH2-R0005-SC Connector start EH2-HT30-10*** 50
EH2-R0010-SL Lever start EH2-HT30-10*** 50
EH2-R0010-SP Push-to-start EH2-HT30-10*** 50
EH2-R0010-SC Connector start EH2-HT30-10*** 50
Pistol EH2-R0005-P   EH2-HT30-10*** 50
EH2-R0010-P   EH2-HT30-10*** 50
Angle EH2-R1020-A   EH2-HT30-10*** 100
EH2-R1030-A   EH2-HT30-10*** 100
Straight EH2-R1016-S Involute spline EH2-HT30-10*** 100
EH2-R1020-S Involute spline EH2-HT30-10*** 100
Pistol EH2-R1016-P   EH2-HT30-10*** 100
EH2-R1016-PH Involute spline EH2-HT30-10*** 100
EH2-R1020-P   EH2-HT30-10*** 100
EH2-R1020-PH Involute spline EH2-HT30-10*** 100
EH2-P1050-P Pulsing model only EH2-HT30-10*** 100
Angle EH2-R2050-A   EH2-HT30-20*** 200
EH2-R2080-A   EH2-HT30-20*** 200
EH2-R2120-A   EH2-HT30-20*** 200
EH2-R2180-A   EH2-HT30-20*** 200
Straight EH2-R2035-S Flange EH2-HT30-20*** 200
EH2-R2055-S Flange EH2-HT30-20*** 200
EH2-R2085-S Flange EH2-HT30-20*** 200
EH2-R2120-S Flange EH2-HT30-20*** 200
Pistol EH2-R2085-PH Direct only, Flange EH2-HT30-20*** 200
EH2-R2120-PH Direct only, Flange EH2-HT30-20*** 200
Angle EH2-R3270-A Direct only, Flange EH2-HT30-300** 300
EH2-R3370-A Direct only, Flange EH2-HT30-300** 300
EH2-R3450-A Direct only, Flange EH2-HT30-300** 300
EH2-R3600-A Direct only, Flange EH2-HT30-300** 300
Straight EH2-R3200-S Direct only, Flange EH2-HT30-300** 300
EH2-R3260-S Direct only, Flange EH2-HT30-300** 300
EH2-R3320-S Direct only, Flange EH2-HT30-300** 300
EH2-R3420-S Direct only, Flange EH2-HT30-300** 300