Products

Handheld Nutrunner: Handy2000 LiteHAND NUTRUNNER

Option

Tracer Arm (Position detecting reaction arm)
  • Tracer Arm is the application for Handy2000Lite which has position sensor, to reduce operator's work load against reaction force and tool weight
  • This system eliminates human errors such as skipping the sequence, and improves the productivity and maintains traceability by collecting the information of coordinates
  • This system assures quality fastening on the sequenced position assembly with different torque target by automatically switch the Channel, and also it prevents double fastening
  • This system requires Arm Unit and Control Unit (TCU), and it does not require external device such as PLC
    Connecting to Handy2000Lite controller requires just a NET Cable, and no complicated wiring is needed

Rotary Grip (option)

Rotary Grip (option)

Torque Range 1 - 55Nm 7 - 120 Nm
Arm Length (Standard) 500mm x 500mm
Number of registered models 99 models
Number of registered positions (per model) 63 positions
Recommended working area W1000mm x D700mm x H330mm
Repetitive position detection accuracy ±1mm ±3mm
Arm Weight 5.5kg 16.5kg
Socket Tray
  • Socket Tray is a unit to assist selecting a right socket and a right tightening program in the process which requires to change multiple sockets.
  • Easy settings by Management software (version 7.12 or later) on PC.
  • Socket holder size is adjustable by an adjustable plate.
  • 2 LEDs (Red, Green) indicate the status of each socket (Socket to pick, Socket is picked, Wrong socket is picked).
EH2-ST4

EH2-ST4

Model EH2-ST4 EH2-ST8
Number of Sockets 4 8
Suitable Control Unit EH2-HT40 (Handy2000Lite), EHC-IF20 (Handy2000Cordless)
Connection Cable *1 EH2-CVST-005 (0.5m)
Expansion Cable *2 EH2-CVST2-010 (1m)
Connection Cable (for extension) *3 EH2-CVST3-050 (5m)
EH2-CVST3-100 (10m)
EH2-CVST3-150 (15m)

*1 For connecting between Socket tray and Controller. An accessory of Socket tray.

*2 For connecting between Socket tray to Socket tray.

*3 For Connection cable and Expansion cable.

Data Logger System: ESW-DL

This software collects tightening (pressing) data from ESTIC’s controllers through Ethernet connection.
This is a solution to fit requirements for data management on safety critical process which requires traceability.

  • The software works for connecting with combination of different series of controllers.
  • Data output by a controller is stored in a database and displayed on the screen.
  • Torque (Press) graph can be displayed on the screen as well.
  • Obtained tightening (pressing) data can be exported with excel format on schedule, and it makes easier for data analysis.

Search of result data

Search of result data

Indication of torque curve

Indication of torque curve